connect two networks with cpe510

connect two networks with cpe510

connect two networks with cpe510
connect two networks with cpe510
2024-06-07 12:29:41
Model: CPE510  
Hardware Version: V3
Firmware Version: 2.2.4 Build 20230616 Rel. 32656 (4555)

I need to connect two networks:

1) 192.168.1.0/24 - switch - modem - cpe510 AP

2) 192.168.2.0/24 - switch - cpe510 C

I connected the 1 and 2 with 2 cpe510 in mode AccessPoint - Client.
It works fine in network 2 : I can reach internet and all devices of network 1.

In network 1 I cannot reach any device of network 2, even if I define a route for 192.168.2.0/24 with gateway the cpe510 

There is a way to reach both networks from both sides?

  0      
  0      
#1
Options
1 Reply
Re:connect two networks with cpe510
2024-06-11 02:18:39 - last edited 2024-06-11 02:19:07

 Hi @diste

 

CPE510 is just an access point, it cannot do routing. 

 

In your network, you need a router or switch to do the stick. 

 

We have an example for tplink router:

How to set up router on a stick with Omada gateway and L2 switch

 

diste wrote

I need to connect two networks:

1) 192.168.1.0/24 - switch - modem - cpe510 AP

2) 192.168.2.0/24 - switch - cpe510 C

I connected the 1 and 2 with 2 cpe510 in mode AccessPoint - Client.
It works fine in network 2 : I can reach internet and all devices of network 1.

In network 1 I cannot reach any device of network 2, even if I define a route for 192.168.2.0/24 with gateway the cpe510 

There is a way to reach both networks from both sides?

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 203

Replies: 1

Related Articles