Can't assign static IP address on ER605V2.0

Can't assign static IP address on ER605V2.0

Can't assign static IP address on ER605V2.0
Can't assign static IP address on ER605V2.0
2024-06-13 16:45:55 - last edited 2024-06-17 01:15:56
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.4 Build 20240119 Rel.44368

Hello everybody!

 

I can't assign static IP address to my devices. The screenshot shows the example. Dahua DVR has static address set to 192.168.1.15, but DHCP gives it 192.168.1.200. The address pool for DHCP serever is set to 192.168.1.30 - 192.168.1.200 as shown below. ER605 has been restarted several times. Dahua DVR has been restarted too. I have the same issue with the Synology NAS, which gets 192.168.1.10 address from the ER605, but the static address for the Synology NAS in Omada Controller is set to 192.168.1.222. The DHCP address assignment is set on both Dahhua DVR and Synology NAS (both devices don't have static address in their settings). Any ideas?

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Can't assign static IP address on ER605V2.0-Solution
2024-06-16 08:33:41 - last edited 2024-06-17 01:15:56

  @Mykyta problem solved with the update of the firmware

Recommended Solution
  2  
  2  
#2
Options
1 Reply
Re:Can't assign static IP address on ER605V2.0-Solution
2024-06-16 08:33:41 - last edited 2024-06-17 01:15:56

  @Mykyta problem solved with the update of the firmware

Recommended Solution
  2  
  2  
#2
Options

Information

Helpful: 0

Views: 345

Replies: 1

Related Articles