[ASK] I have a question about constructing a mesh with the EAP series.

[ASK] I have a question about constructing a mesh with the EAP series.

[ASK] I have a question about constructing a mesh with the EAP series.
[ASK] I have a question about constructing a mesh with the EAP series.
2024-08-14 04:53:27 - last edited 2024-08-15 08:55:24
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version: -

(English is not my native language)

 

I saw this article.


https://www.tp-link.com/ae/support/faq/3596/
 

I have a question about constructing a mesh with the EAP series.
 

Purpose :)

I would like to use one same SSID. Bandwidth is not greatly required, but continuity is important, so we are planning to construct a mesh. I also needed about the need for an external AP.
 

Q1) Is backhaul (not wireless) function possible without OC200 amada controller ? (Not wireless / Using another company's router )

 

|
 

 

 

 

If I couldn't Q1 (wired)


Q2) What the article says is that there is no need for an omada controller and no need for tp link router? (wireless mesh mode)

 

 

 


Thanks mate. Have a good day.

  0      
  0      
#1
Options
2 Accepted Solutions
Re:[ASK] I have a question about constructing a mesh with the EAP series.-Solution
2024-08-15 03:25:55 - last edited 2024-08-15 08:55:24

Hi  @Moon2 

 

Yes, you can use a third-party router to connect EAP225. A wired connection also works. And compared to wireless mesh, wired backhaul will provide better performance.

You can give all the EAP units the same SSID and password, and most clients will be able to roam between them automatically.

 

With this connection, you don't need an Omada controller.

Recommended Solution
  3  
  3  
#2
Options
Re:[ASK] I have a question about constructing a mesh with the EAP series.-Solution
2024-08-15 07:17:36 - last edited 2024-08-15 12:09:04

Hi  @Moon2 

 

Could I use same network(meshed)?

without OC200 (that article said).

 

>>>Yes. You can configure all the EAP SSID&password the same, and this don't require OC200.

 

BTW,  we don't call wired backhaul mesh, but it doesn't matter.

Recommended Solution
  0  
  0  
#4
Options
8 Reply
Re:[ASK] I have a question about constructing a mesh with the EAP series.-Solution
2024-08-15 03:25:55 - last edited 2024-08-15 08:55:24

Hi  @Moon2 

 

Yes, you can use a third-party router to connect EAP225. A wired connection also works. And compared to wireless mesh, wired backhaul will provide better performance.

You can give all the EAP units the same SSID and password, and most clients will be able to roam between them automatically.

 

With this connection, you don't need an Omada controller.

Recommended Solution
  3  
  3  
#2
Options
Re:[ASK] I have a question about constructing a mesh with the EAP series.
2024-08-15 05:39:50 - last edited 2024-08-15 05:41:13

  @Vincent-TP 

 

Thank you your answer.

 

 

You can give all the EAP units the same SSID and password, and most clients will be able to roam between them automatically.

 

==========================

 

You said like that.

 

But, What I wanted to say

 

Could I use same network(meshed)?

without OC200 (that article said).

 

not handover roaming.

 

 

Sorry my English :<

Thank you for always kind answers.

  0  
  0  
#3
Options
Re:[ASK] I have a question about constructing a mesh with the EAP series.-Solution
2024-08-15 07:17:36 - last edited 2024-08-15 12:09:04

Hi  @Moon2 

 

Could I use same network(meshed)?

without OC200 (that article said).

 

>>>Yes. You can configure all the EAP SSID&password the same, and this don't require OC200.

 

BTW,  we don't call wired backhaul mesh, but it doesn't matter.

Recommended Solution
  0  
  0  
#4
Options
Re:[ASK] I have a question about constructing a mesh with the EAP series.
2024-08-15 10:09:15 - last edited 2024-08-15 10:11:11

  @Vincent-TP 

 

Thank you, Vincent

 

It's hard these days because we're flooded with so many terms.

 

Thanks again for your answer.

 

Have a good day !!

  0  
  0  
#5
Options
Re:[ASK] I have a question about constructing a mesh with the EAP series.
2024-08-15 11:16:53

  @Vincent-TP 

 

https://www.wi-fi.org/discover-wi-fi/wi-fi-easymesh

 

Is this the term you are talking about?

  0  
  0  
#6
Options
Re:[ASK] I have a question about constructing a mesh with the EAP series.
2024-08-16 01:28:58

Hi  @Moon2 

 

You may learn from this link:

Basic introduction to AP Mesh and Fast Roaming

  2  
  2  
#7
Options
Re:[ASK] I have a question about constructing a mesh with the EAP series.
2024-08-20 00:16:35

  @Vincent-TP 

Thank you, Vincent

I worked on it last weekend and got very good results.

Thank you for your help.

Have a good day. Thank you.

  1  
  1  
#8
Options
Re:[ASK] I have a question about constructing a mesh with the EAP series.
2024-08-20 01:44:42
My pleasure. :)
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 469

Replies: 8

Related Articles