Business Community > All Threads > VLan
< All Threads

VLan

VLan

VLan
VLan
2024-08-31 11:13:46 - last edited 2024-09-05 01:12:58
Model: TL-SG108PE  
Hardware Version: V5
Firmware Version: 1.0.0 Build 20220930 Rel.36161

I'm a novice and this is the first time i have set up vlans (multiple attempts before i could get it to work).

the picture shows the network i have created it all appears to work fine with everything being able to connect to the internet and the vlans are I think segregated from each other.

 

a couple questions

I read somewhere on this forum that I should remove "non trunk ports" from vlan 1 in my case i assume i should remove ports 4,5,6,7 from vlan 1 is that correct?

On the AP there is no choice if you select multi ssid then SSID 1 is on VLAN 1 you cannot disable or change its VLAN so i have no choice I have to use vlan 1 if i want to have multi ssid

 

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:VLan-Solution
2024-09-02 01:32:47 - last edited 2024-09-05 01:12:58

Hi @corkscrew22 

Thanks for posting in our business forum.

No.

Correct.

 

On the pinned threads on this switch page, you have explanations on VLAN and a generic guide.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:VLan-Solution
2024-09-02 01:32:47 - last edited 2024-09-05 01:12:58

Hi @corkscrew22 

Thanks for posting in our business forum.

No.

Correct.

 

On the pinned threads on this switch page, you have explanations on VLAN and a generic guide.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
Re:VLan
2024-09-02 10:31:07
Hi Clive thanks for taking the time to reply. I have read your pinned threads very informative although a lot of it over me head for now. However They have raised another question for me in the network i have created i did not set up vlan interfaces in the ER605 and all works fine. Am i right in thinking i only need to set up vlan interfaces in the ER605 if i want to put the vlans on separate subnets same as in some of your examples
  0  
  0  
#3
Options
Re:VLan
2024-09-03 00:52:26

Hi @corkscrew22 

Thanks for posting in our business forum.

corkscrew22 wrote

Hi Clive thanks for taking the time to reply. I have read your pinned threads very informative although a lot of it over me head for now. However They have raised another question for me in the network i have created i did not set up vlan interfaces in the ER605 and all works fine. Am i right in thinking i only need to set up vlan interfaces in the ER605 if i want to put the vlans on separate subnets same as in some of your examples

With the readings, you should know that this setup you have now is not VLAN interface-based.

If you want to use the VLAN interface-based, you are getting the network segment. That's the interface on the ER605 and VLAN tag/untag on the switches.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 208

Replies: 3

Related Articles
VLAN Setup / connection
1317 0
VLAN is not being passed from pfSense to Switch
5227 0
TL-SG108PE - System IP Setting and VLAN
18482 2
VLAN tagging using TP link EAP and managed switch
1223 1
TL-SG108PE v5 issue after upgrading to latest firmware with 802.1Q VLAN
664 0
VLAN not working with TP link managed switch
2094 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.