ER605 site-to-site and client-to-site
Hello, I want to create a small VPN network in our branches to have access to cameras via VPN.
We have 5 locations. Each location has an ER605 router installed.
-Main office A 192.168.100.0/24
-Branch B 192.168.101.0/24
-Branch C 192.168.102.0/24
-Branch D 192.168.103.0/24
-Branch E 192.168.104.0/24
I created a site-to-site in between
A<->B 192.168.100.0/24 and 192.168.101.0/24
A<->C 192.168.100.0/24 and 192.168.102.0/24
A<->D 192.168.100.0/24 and 192.168.103.0/24
A<->E 192.168.100.0/24 and 192.168.104.0/24
And client-to-site in A location 192.168.100.0/24
When I am connected to network A via LAN, everything works, I can see all devices in B C D E.
Then I wanted to create a client-to-site on router A and connect with a VPN program on my computer to router A.
After connecting "from home" to client-to-site VPN A, I can only see devices from network A. Is it possible to set these VPNs so that a remote user connecting to Router A has access to the other VPNs as if it were connected via LAN?
