TP-Link VIGI NVR2016H keeps beeping because of unformatted hard disk. Failing to format.

TP-Link VIGI NVR2016H keeps beeping because of unformatted hard disk. Failing to format.

TP-Link VIGI NVR2016H keeps beeping because of unformatted hard disk. Failing to format.
TP-Link VIGI NVR2016H keeps beeping because of unformatted hard disk. Failing to format.
2024-10-01 12:05:03 - last edited 2024-10-04 04:30:08
Tags: #HDD
Model: VIGI NVR2016H  
Hardware Version: V1
Firmware Version: 1.0.0 Build 230625 Rel.46908n

 

NOTE: Hardware version is 1.20

 

Video clip of the problem: https://youtu.be/mTGCfST9rjY

 

After updating to the latest firmware, the hard disk is not even detected:

 

 

Attached HDD: https://www.amazon.in/gp/product/B0966TZJGJ/

NVR link: https://www.amazon.in/gp/product/B0CVB1K426/

  0      
  0      
#1
Options
1 Reply
Re:TP-Link VIGI NVR2016H keeps beeping because of unformatted hard disk. Failing to format.
2024-10-04 04:30:00 - last edited 2024-10-08 02:59:52

Hi  @doggycoder 

It only occurs after your firmware has been updated?
It was detected fine before you've upgraded it?

Strange enough.

Have you tried re-wire the HDD? See if it can be detected again?

 

Could also be a problem with the HDD. Is this a new HDD? Or used one? What about the health check of this HDD? Working fine on a computer?

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 512

Replies: 1

Tags

Related Articles