ER605 - Adopting loop

ER605 - Adopting loop

ER605 - Adopting loop
ER605 - Adopting loop
2 weeks ago
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.6

I have ER605 in several locations.


They are connected site-to-site to one ER605.

A to B
C to B
D to B
etc.
 

Main "B" is stuck in a Disconnected/Adopting loop. 
 

I am sending logs for viewing. 

 

While writing this topic, after a few hours the router was up and running for 20 minutes now. The only thing I did was turn off VPN on A C D. I don't know if this has anything to do with it.

For now the router is working, so I'll leave it that way. But the logs may be useful for support to check whether there are any errors in the software.

File:
20-23-51-B2-D3-9B_deviceInfo_2024-10-29-21-34.zipDownload
  0      
  0      
#1
Options
2 Reply
Re:ER605 - Adopting loop
2 weeks ago

Hi @rybakowski 

Thanks for posting in our business forum.

You should probably paste a diagram of your network and configuration for IPsec. It looks like a problem with your network design by plain description and behavior.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#2
Options
Re:ER605 - Adopting loop
2 weeks ago

Yes I can give you more details. What's the best way to create a diagram? But it seems to me that it is not a problem with my network because it worked without any changes for several months. But I could be wrong.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 100

Replies: 2

Related Articles