This Article Applies to

ER7412-M2 (UN) V1.0 and 1.60

Release Notes

Version Info:

Firmware for ER7414-M2(UN) V1.0 and V1.60. This firmware is fully adapted to Omada Controller V5.15.20.X.
Minimum FW Version for Update: 1.0.1 Build 20240719 Rel. 56423

Please note that you will NOT be able to downgrade to previous official firmware after upgrading to this firmware!

New Features:

1. SD-WAN
2. Domain name supported for OpenVPN and Wireguard VPN
3. Virtual WAN
4. Disable NAT
5. Google LDAP
6. LAN DNS
7. FQDN/Wildcards WAN DHCP Option

Enhancements:

1. Optimized CPU utilization.
2. Optimized the time to enable backup link.
3. Optimized booting time.
4. Optimized the time to dial up the WAN link.
5. Optimized the time to upgrade FW.
6. Optimized the time to generate OpenVPN profile.

Bug Fixed:

1. Fixed the issue that the DHCP address pool would not generate any log when all IP addresses were exhausted in specific scenarios.
2. Fixed the issue that the L2TP server process occasionally crashed.
3. Fixed the issue that the IPS process exited abnormally and generated a core-dump file, which led to memory exhaustion.
4. Fixed the issue that static route entries with special characters in the name field could not take effect.
5. Fixed the issue that the L2TP server occasionally leaked address pools when iOS devices connected.
6. Fixed several security issues.
7. Fixed the issue where HTTPS redirection cannot be enabled in standalone mode.
8. Fixed the issue where related static routes become invalid after L2TP VPN restart.
9. Fixed the issue where discarding unknown unicast packets affects WOL and other functions.
10. Fixed the issue where PPTP VPN occasionally disconnects and cannot recover.
11. Fixed the issue where adoption fails due to DNS resolution anomalies under certain conditions.
12. Fixed the issue where DHCP Reservation is ineffective in certain scenarios.

Additional information

1. Adapted to the new Omada VI.
2. Adapted to RED certification requirements.
3. Enhanced device security.

Firmware Download

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Gateways

Firmware Download Link

ER7412-M2(UN) _V1_1.1.0 Build 20251009

Notes:

(1) The above firmware applies to the described models.

(2) Your device’s configuration won’t be lost after upgrading.

(3) If you have disabled the HTTPS port, please enable the HTTPS port before upgrading the firmware.

Additional Information

All feedback is welcome, including letting us know about successful device upgrades.

If somehow you encounter an issue during or after the router upgrade, it's suggested to contact us with the following info:

• Omada Controller version 
• Device Firmware version with Build number (previous and current)

If your router gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.

How to use the Emergency Mode to recover the firmware for Omada Gateways

Update Log

Octomber 11th, 2025:

Release of this post.

Recommended Threads

Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]