@Edge_Sangral Is your X50 connected to an ISP router for internet connection? If so you have what is known as a double NAT scenario You would therefore need to log into the ISP router and forward the...

@SterkSpies How often is this disconnecting and is the top LED showing RED? Did you try locating the node in the same room as another node to test this? If it holds solid when located closer to...

@DaKings Yeah that will work, done it before Basically you can connect anything you want to the LAN port on the MESH AP, it will then just forward all traffic for you over the MESH to the ROOT AP. In...

@aravaca Are you using WPA3 SAE as your WiFi Security? If so it could be an issue with mixing WPA2 and WPA3 version The newer EAP6xx range use WPA3 with SAE, the older 2xx range use WPA2 AES, the...

@MeshFan You need to go to SETTINGS > SITE and in there disable (uncheck) the box for MESH That will stop the APs talking via WiFi, therefore leaving only the wired backhaul and hopefully fixing your...

@Tareq12 If its to cover a distance in one direction (point to point) then a pair of Pharos CPE APs would be the best option for you. THey are designed to fire WiFi signal over a distance between...