@Ms_D_Tech I would say it really depends on how you have your internet setup. If you are Fibre via a ONT (small white box that converts fibre to network) then you could bypass the x10 and just go...

@Ms_D_Tech Hey again In that case you just need to go to the app and add the M5 as an additional station on your existing Mesh. You can then switch the M5 to the MAIN Deco using the app (see below)...

@Dylandub8 If you can try plugging a laptop into the cable you just ran to make sure its working ok. It could well be that the AP is broadcasting a wireless signal, but the cable connecting it to the...

@Ms_D_Tech Hey and Welcome! Yes that will work perfectly for you, you can mix and match deco as you feel necessary! Have you setup the M4 mesh already and are looking to add an additional M5? OR is...

@Jaybird80 Hey Sorry the slow reply, was away on holiday for a bit By the sounds of it you have an area that is hard to reach in the bedroom/office and what is happening is the Deco is switching to...

@Jovanwe To find the router IP its easy.. two ways to do it. 1. Its likely printed on the device label, will say something like 192.168.0.1 login ADMIN ADMIN. Thats what you are looking for. When...