@10ken01 Hey The hub is likely a good part of your issue, WAN ports are designed to be direct connected and not via a switch or hub. If possible direct connect the WAN port and use the hub on the...

@SteveCos No worries, hopefully does as said on the tin!

@SteveCos Hey Steve If you go to the Deco app and run the network optimiser it will re-scan the airspace and look for a new channel to run on, is that what you hoping to achieve? In answer to your...

@LloydLukose Not specifically used this model, but in answer to your question.. YES you can split a 3x pack to have the 3x nodes seperate as standalone devices.

@towo The ROOT and MESH nodes need to be on the same channel, it could be if you have these as AUTO they are not on that same channel. Set them for Manual and reboot, see if it reconnects then

@etherknot The short answer is NO you dont need to use Omada switches, you can power the APs from any POE switch. However, if you are looking to implement managed VLANs or ACLs, then a switch is...