VirgoLV5Online
Following: 5Followers: 1
Forums/ Business Switches
a week ago
Re: TL-SG2210MP - fan speed regulation
@lacrimal It depends on overall power consumption I think.
0HELPFULS
Forums/ Business Routers
a week ago
Re:Inter VLAN connectivity issue. Not able to access vlan1 ip from vlan10,vlan20,vlan40
@Rishi_J Have you set the ACL on the controller? If not, the different VLAN interfaces can be accessible in both directions by default. It may be a VM problem, try turning off the firewall.
0HELPFULS
Forums/ Omada EAP
a week ago
Re:EAP615 Wall mount for whole house
@juryman Not sure if this is possible as I haven't heard of it being used this way, but Ceiling EAP's signal is mainly concentrated on the front panel, so it's best to keep the client within the...
0HELPFULS
Forums/ Business Routers
a week ago
Re:Can Site to Site VPN work with 2xER605 but only main branch has public ip?
@shifter Under normal circumstances, a public IP at both ends is best. This is because we need to ensure that the WAN IPs at both sides are accessible to each other. However, there are special cases...
0HELPFULS
Forums/ Omada EAP
a week ago
Re:EAP670 continuously "changing LAN IP address/mask" and being readopted to controller
@dakev1 You can also try to optimise your network environment. Set the 5G channel for the EAP to a different one, preferably 1.6.11 for the 2.4G channel. The channel width can be set to 20M. Set the...
0HELPFULS
Forums/ Business Routers
a week ago
Re:Can Site to Site VPN work with 2xER605 but only main branch has public ip?
@shifter Yes, you can use 2 ER605 to set the site-to-site VPN, just need to note that set the port forwarding rule on the NAT device in front of ER605 which has private IP. Open the port for R605's...
0HELPFULS
123...172