Forums/
Wireless
2022-09-15 08:12:31
@dakev1 Has the IP address of the EAP actually changed? Has the local OC200 been rebooted, etc.? Is there a reboot schedule? Do you still have a problem now that you have set the EAP to a static IP?...
0HELPFULS
Forums/
Switches
2022-09-15 06:26:02
@jdaniele Like TL-SG3428MP.
1HELPFULS
Forums/
Gateways
2022-09-14 08:38:55
@cdx969696 Port 5 of the router should also be set to tagged, and port 14 on the switch can be set to tagged if the device connected behind the switch can handle tagged data....
0HELPFULS
Forums/
Pharos Wireless Bridges
2022-09-14 08:18:54
@FSK The signal strength in your screenshot shows -75dBm, which is a bit too low and the signal is not very good. Suggest that you can adjust the CPE position angle appropriately, try to change the...
0HELPFULS
Forums/
Pharos Wireless Bridges
2022-09-14 08:01:45
@iamjoshua Your screenshot shows that these settings need to be set on the modem, but the CPE is not a modem, you can read this article describing several modes of the CPE：...
0HELPFULS
Forums/
Controllers
2022-09-14 07:44:41
@Tescophil In case it really is DNS causing the problem, try changing the DNS to 8.8.8.8/8.8.4.4, or just get it automatically. See if the problem recurs.
0HELPFULS