@shifter Under normal circumstances, a public IP at both ends is best. This is because we need to ensure that the WAN IPs at both sides are accessible to each other. However, there are special cases...

@dakev1 You can also try to optimise your network environment. Set the 5G channel for the EAP to a different one, preferably 1.6.11 for the 2.4G channel. The channel width can be set to 20M. Set the...

@shifter Yes, you can use 2 ER605 to set the site-to-site VPN, just need to note that set the port forwarding rule on the NAT device in front of ER605 which has private IP. Open the port for R605's...

@juryman The Wall Series EAPs have a 10m WiFi coverage radius and the Wall Series EAPs do not support Mesh functionality. Outdoor coverage requires additional consideration for outdoor series EAPs...

@Christian2705 Have you set up the Port VLAN? Did you set the PVID for the EAP's port?

@TopicsLP This gateway is probably not so smart, you can set a smaller percentage for WANs with latency, go to Network --- WAN, this interface allows you to set Upstream bandwidth and downstream...