Fleegle61LV2Online
Following: 0Followers: 0
Forums/ Omada Cloud SDN
3 weeks ago
Re:What does Gi1/0/5 or Gi1/0/24 mean?
@lukass2000 It's actually not a BAD thing to have multiple paths to the same desitnation. That gives you diverse routing so that if one link fails, the other will work just fine. RSTP is there just...
0HELPFULS
Forums/ Omada Cloud SDN
3 weeks ago
Re:What does Gi1/0/5 or Gi1/0/24 mean?
@lukass2000 Thanks for the picture. That tells alot! Now, I don't see any reason for a loop at first glance or why a port would go blocked. What I would ask; are you meshing the AP's??? That could be...
0HELPFULS
Forums/ Omada Cloud SDN
3 weeks ago
Re:What does Gi1/0/5 or Gi1/0/24 mean?
@lukass2000 you seem to have a loop going on between port 5 and port 24 or you have RSTP Rapid Spanning Tree Protocol kicking in since it may that both of those ports go to the same location or there...
0HELPFULS
Forums/ Omada Cloud SDN
2022-09-17 13:20:17
Re:Turn off lights OC200
@JGM_JGM I have not seen anyplace where you can just do the OC200 only. You can go into settings/site and do a global LED change or each device on its own.
0HELPFULS
Forums/ Omada Cloud SDN
2022-09-14 17:34:10
Re:Remote logging from OC200 to Synology NAS issues
@Virgo Right now I have the NAS set to BSD and it appears to be receiving properly formatted information. I will be changing that to IETF to see if I start to see the errors. Thats the only 2 canned...
0HELPFULS
Forums/ Omada Cloud SDN
2022-09-14 11:05:08
Re:Omada Hardware Controller v5.5.7 issues
@lflorack double check. I have a 3.20 2210P and it prompted me to go to 3.20.5 I just did it this morning so I will give it 24 hours to see if it works without any problems or requiring a power cycle.
0HELPFULS
123...15