JeffCooperLV1Offline
Following: 0Followers: 0
Forums/ 5G/4G Wi-Fi Routers/MiFi
2018-02-12 19:00:48
Re:MR200 Invalid Value
I had this when I upgraded the firmware once. I used the option to save the settings then re-loaded the settings so that I did not have to re-configure - that was a mistake. It is best to upgrade...
0HELPFULS
Forums/ 5G/4G Wi-Fi Routers/MiFi
2018-02-12 18:55:48
Re:Archer Mr200 original antenna dbi value?
The MR200 works well with external antennas connected using standard SMA connections on the cables. A single antenna gets a good signal but dual antennas get a better signal. I have tested a single...
1HELPFULS
Forums/ 5G/4G Wi-Fi Routers/MiFi
2018-02-12 18:27:36
Alternative firmware for Archer MR200
It is possible to install alternative firmware on the Archer MR200. see:- https://forum.openwrt.org/viewtopic.php?id=64293 It took some time to understand how to do this but I did succeed eventually....
0HELPFULS
Forums/ 5G/4G Wi-Fi Routers/MiFi
2017-01-19 19:50:43
Inconsistent statistics on Archer MR200
Model : Archer MR200 Hardware Version : Firmware Version : ISP : I have an Archer MR200 and have been trying to collect statistics from this router for each device on my network that accesses the...
0HELPFULS
Forums/ Pharos Wireless Bridges
2016-09-10 14:36:26
Re:TL-WA7510N not able to be powered by TL-SG2210P
Thanks danymarc. I will have to do this then:- TL-SG2210P----------PoE splitter==========passive PoE power injector----------TL-WA7510N Crazy, but it works.
0HELPFULS
Forums/ Pharos Wireless Bridges
2016-09-10 01:39:42
TL-WA7510N not able to be powered by TL-SG2210P
Model : TL-WA7510N Hardware Version : WA7510N v1 00000000 Firmware Version : 3.12.6 Build 130427 Rel.69746n ISP : I have a TL-WA7510N AP and it is not able to be powered by a TL-SG2210P PoE switch....
0HELPFULS
12