SerenLV1Online
Following: 0Followers: 0
Forums/ Business Routers
2022-07-12 11:02:19
Re:ER605 v1 WAN port assigns itself 192.168.100.11
Hey folks, Just wanted to report back in case others ran into this or a similar issue. It has been several days since this issue has occurred. This leads me to believe that the problem rested with...
0HELPFULS
Forums/ Business Routers
2022-07-07 01:54:19
Re:ER605 v1 WAN port assigns itself 192.168.100.11
@KimcheeGUN The WAN and WAN/LAN1 are coming from two separate internat connections. Meaning, each port is connected to its own cable modem. However, both connections are provisioned by the same...
0HELPFULS
Forums/ Business Routers
2022-07-06 10:43:11
Re:ER605 v1 WAN port assigns itself 192.168.100.11
@Virgo Thanks for replying. See below for my answers Is the cable modem you mention a pure modem? No. It is a combination modem/router. However, it is in bridge mode. (this is the same for WAN/LAN1...
0HELPFULS
Forums/ Business Routers
2022-07-02 21:43:49
ER605 v1 WAN port assigns itself 192.168.100.11
I have an ER605 switch configured for load balancing WAN and WAN/LAN1 with internal IP address 192.168.0.1 assigned as a gateway. The switch's DHCP server is assigning static IP addresses to two...
0HELPFULS
Forums/ Omada Cloud SDN
2022-06-24 21:23:13
Re:Speedtest on Omada Controller Doesn't Take Effect.
@Fae I am still having issues with the speed test and the above solution does not apply. Please see the attached images: System Info: ER605 v1.0 5.3.1 Both WAN ports running at full duplex and...
0HELPFULS
Forums/ Requests & Suggestions
2022-03-04 05:25:48
Re:TL-R605 request manual DynDNS option to configure other providers
I second this request to implement custom services.
0HELPFULS
12