@Blgc I don't have an answer for your question. I am new to this as I just replaced my Synology router with the Omada ER706W. When trying to set up ACLs to match my firewall rules in the old router,...

I too would like to see this fixed. I just got a new ER706W and now see a hidden SSID on the 5 GHz band. There should be a way to turn this off if you are not using a mesh setup. Edited 23-06-25: In...

ACL rules should support a single IP address or a range of IP addresses within a subnet for inter-vlan routing. The ability to specify port numbers should also be supported.

Using the Omada app (v3.24.36) for iOS, I could not configure a VLAN ID for a newly created SSID. It was necessary to later connect with a PC to the EAP610 and configure the VLAN ID. Please consider...

@BrianQ81 What I would recommend is to configure the SG1016PE with the same settings as the SG108PE that it is replacing. That is, use the same exact settings that you have in the working SG108PE in...

@BrianQ81 If the PC running the Easy Smart configuration utility is on the same subnet as the switch, there should be no problem. The way you now have the SG1016PE configured, only the default VLAN...