@Maarten_ I believe this is a limitation in the Omada system. In my case, I have a laptop used for maintenance and I would like it to always have the same last octet when it connects to a given VLAN,...

@tmeita In looking at the 802.1Q VLAN screenshot of your switch configuration, only one VLAN should be untagged on any given port. The VLAN 1 untagged ports should be 1-6, 9, 11-17.

As the Omada Network 6.2 seems to be the standard now, there are some minor grammatical errors in the English language controller that should be corrected to make it a “polished” product. Those...

@FN737 Does your main VLAN (192.168.14.0/24) have a VLAN tag of 1 or 14? In your first post, it was 14 and in your last post. it is 1. Are you using a separate VLAN for management? How many total...

@FN737 This should not be too hard to troubleshoot, depending on what you have available (such as a laptop, etc.). In Omada networks, inter-VLAN routing is allowed by default unless a VLAN is...

@Vincent-TP This issue has taken a strange turn. I just finished upgrading my four SG2008 switches to the latest firmware. Now under the Configuration Result, two of the three EAP650-Desktop devices...