@Clive_A Thank you Clive_A. I did as you suggested and am now able to make connections to all three SSID's broadcasting. I guess my earlier searches were not quite on topic to find your guide. Your...

My core switch is a TL-SG3452P in an Omada network and I have (5) EAP650's direct connected and adopted each broadcasting the same (3) SSID's on separate VLANs and everything is working fine. I...

@Virgo I was able to get the hardware controller installed and devices adopted. I thought that since I had previously tried and failed with a software controller that the process would be more...

@Virgo Thank you for the reply. I will give that a try.

I found a thread when searching called "Adding an OC200 to an already configured network in standalone" that is similar to my situation. My network has an existing ER605 V2.0 gateway, SG3452P V3.20...