EAP650 through multiple switches?
My core switch is a TL-SG3452P in an Omada network and I have (5) EAP650's direct connected and adopted each broadcasting the same (3) SSID's on separate VLANs and everything is working fine. I cannot directly connect a sixth EAP650 to the TL-SG3452P because to get another cable there is quite difficult but I do have a TL-SG1218MPE connected to the core switch in the area where I need the sixth EAP. The TL-SG1218MPE already has a few VLAN's running PoS and Surveillance devices without problem. When I connect the EAP650 to the TL-SG1218MPE I cannot make a connection to any of the SSID's with my phone. I had originally adopted and setup the sixth EAP when it was connected to the core switch but have now moved it to the other switch.
Port 17 of the TL-SG1218MPE is connect to port 8 of the TL-SG3452P. My 802.1Q VLAN Configuration on TL-SG1218MPE is as such:
VLAN 1 - member ports 1-18 and all are untagged
VLAN 20 - member port 15, 15 untagged, 17 tagged, port 15 PVID 20
VLAN 70 - member ports 1-6, 1-6 untagged, 17 tagged, ports 1-6 PVID 70
EAP650 connected to port 16 and set to broadcast SSIDs over VLANs 30, 40 and 60 (same as EAPs direct connected to TL-SG3452P)
I've tried untagging port 16 and tagging port 17 for VLANs 30, 40 and 60 but I get no WiFi connection. Multiple PVIDs cannot be configured on port 16 so I don't know how to get the tagging/untagging to work properly for the EAP.
Is it possible to get the EAP to communicate the same SSIDs and VLANs as the other (5) EAPs through both switches?
Any help would be appreciated.