Hi @danher The network topology is incorrect. The EAPs are each connected directly to the ER605, but the map shows them as if they were connected in series. >>> This happens occasionally, try to...

@akikoy If this issue only happens on that poe adapter, you may contact your retailer to check warratny.

Hi @Ovanss When you trying to adopt the EAP, is the controller PC connecting to the EAP default SSID? When the device is under provisioning status, it's trying to apply the controller's settings....

Hi @PISD Please have a look at the solution of the following post: https://community.tp-link.com/en/business/forum/topic/681336

Hi @Tintronic We had similar feedback before. It was the WAN settings are wiped after the firmware update. Did that happen on your case? Did the WAN connection type turn to dynamic IP, or it is still...

Hi @martinwinlow 1/ Is the general setup layout as it should be as for as the CPE210's are concerned? I have the 2 CPE210s on the main house on the same network, ie 192.168.1.xxx but with different...