There's an issue with Hub storage of any camera (410, 425, 720): if you set the storage to a hub (h200 in my cases), the "Correct Event Type" menu option disappears, meaning you can't correct the...

The 720 will connect to the H200. My hub firmware is 1.5.1 Build 20250228 Rel 27505. On the Home screen, tap the hub Connected Devices + Connect existing Devices Tick the 720 Connect I also have my...

Instead of using home and Away, I have set up Shortcuts which turn everything on and off as necessary. This works really well, apart from the lakc of notification control on the cameras. What is...

@Solla-topee When you enter the Auto-On Settings page, you see the Sensor section first, which may be because the camera is designed to be displayed this way. Just make sure that the detection areas...

@Solla-topee Arrh, no so. Even if I deselect Left Middle and Right, select "Camera" then leave that screen, when I go back to it, it has swapped back to Sensor (which now has no zones selected). PS:...

@PaRi53 I feared as much. I am in the same situation as you exactly. The only thing I came up with was setting up smart actions to arm and disarm the cameras themselves (which is not what you want to...