@JakeG Hi, Sorry for the delay; What is the signal source of the 3rd Deco, the main P9 or the 2ND P9？ Or can I have a picture of the signal source of the 3rd Deco? Could you please also swap the...

@Zetsu Hi, Before the firmware upgrade, how much Wi-Fi speed you could get from the main Deco? Would turning off the 2.4ghz on the Deco improve the speed? Could you please help me run the following...

@WVDW Hi, the current firmware does not support changing the signal source, But we have a firmware that would improve the signal source selection mechanism, if you wanna have a try, please leave me a...

@Scramblur Hi, the higher power rating might be part of the reason. Have you tested the approximate temperature on the Deco X60, comparing with Deco X25?

@bemot Sorry to tell you TL-WPA8630P V3 does not have a beta firmware to turn off DHCP yet, if you met similar problem, can you help provide the information mentioned in the thread below so that we...

@Bryce0736 Hi, may I know how much bandwidth you have subscribed from the ISP? Have you checked the signal source strengthen on the 2nd Deco, 2-3 bars? Could you please also test the Ethernet speed...