quadrophenic wrote @forrest I can confirm my map will also allow me to show coverage and details at the same time. I am on latest oc200 firmware 1.1.1 Showing coverage and either details or labels on...

videolinchen wrote Hallo, Danke für diesen Beitrag, bin auch auf der Suche nach Versorgung mehrerer Wohnungen! Danke Gerne. Wenn die Wohnungen nahe genug beieinander liegen (im Umkreis von bis zu 70...

Hello @forrest, iit is a big problem that TP-Link most often doesn't support former hardware versions of EAPs and Pharos devices (e.g. CPE 210) once a new hardware version came out. Sometimes it's...

You should always use outdoor mounts for CPEs, not indoor (to much attenuation). Of course you can supply house B from house C, which gets its feed from house A. You can even use the CPE @ house C as...

mevalier wrote My problem is, I cannot even ping all these IP from other subnet in my LAN, eg; from 192.168.86.0/24. My main priority is to access that CCTV Decoder. Please advice what is the correct...

CPE210 in Client mode needs to be in the same subnet as the AP of the wireless hotspot (X.X.1.0). If the Archer is used as a router, it needs to be in this same subnet on its WAN side, too. If it is...