jonas wrote As for the 1:1 aspect ratio issue, the reason why we keep the ratio is because it may cause some dispaly problem of images, such as white edge. Hello Jonas, thanks for coming back to this...

kiekar wrote With your suggestion I removed from VLAN 1 port 3 which resulted with the NAS device getting a dhcp ip address from pfsense of 192.168.30.65 but unfortuneately I'm unable to connect to...

This setup doesn't make sense to me. VLAN 30: Assuming the pfSense sends tagged frames into port 1 of the switch, those frames are forwarded by the switch to port 3 and the tag will be removed on...

Channel 5 is best. Channel width should be 20 MHz (meaning it uses channels 3, 4, 5, 6 and 7 if set to ch5 with 20 MHz channel width). Your antenna gain setting is wrong. Should be set to 15 dBi,...

cosmindnl wrote Working as expected. I will recomend this solution. It is working for almost two weeks without any issue. Great it works for you. Please mark this thread as solved by selection the...

You can set 802.11n-only WiFi mode rather than 802.11b/g/n mixed mode and up to 40 MHz channel width (20/40 mixed is the actual setting if I remember correctly). This saves AirTime, gives better...