This is too few information, missing PVID. TP-Link VLANs work as defined in the standard. The Primary VLAN ID (PVID) is the ID assigned to untagged Ethernet frames if the port they arrive on is an...

Anahaym wrote yes, with the default VLAN 4 it works, but if I assign other IP range (for example 10.10.10.0/24) on the computer - it works too. I need to allow only the 192.162.102.0/24 network....

lbm wrote Are you sure about this ? if I select the proper verison, and region, then I cannot find any firmware at all for the 2.0 model. It seems that tp-link is very strict regarding models, and...

Dynamo wrote I successfully downloaded the package and installed it today. No failure messages occured during install. The controller fails to start however. The start log contains this error: Error...

Dynamo wrote The private folder on you ftp is now empty? No, it's not empty, but you don't see any files therein. Just download the file as described in the first post of this thread using a FTP...

Yes, could be a voltage drop which triggers reboot if under load, maybe caused by bad/too long cable or the PoE adapter.