Pharos firmware is always the same no matter which region the device is for. The region code is saved in a flash partition of the device enabling or disabling functions / channels in the firmware...

Gerardo-ARG wrote I understand! But my mistake: The reset it's only at power level, configuration is not reverted to the factory one, BUT after startup when I go to web interface I find an...

kidzz wrote Anybody can confirmed that port 1 can be set for 2 VLAN IDs, the rest of the ports seperates the VLAN IDs. Tq As I wrote: yes. I don't see what should be the problem to do so.

Gerardo-ARG wrote We have changed the entire UTP cable and POE inyector with no success. Are you shure it's not a firmware bug...? UTP cable is not recommended. Use at least F/UTP, S/UTP or even...

kidzz wrote Hello, noob here. can this switch able to receive 2 VLAN IDs on the same port. ie port 1 - vlan 500 and vlan 600, port 2 to 5 - vlan 500, port 7 - vlan 600. Sure, why not? TL-SG108E fully...

Todd wrote My goal is to setup a Vlan with a completely different IP block than what is on the remaining ports of the switch. You need to set up an external DHCP server somewhere in the network. The...