miked315 wrote Seems like tpeap restore doesn't work? root@jalapeno:/opt/tplink/EAPController# tpeap restore /tmp/backup Restoring database from dump in '/tmp/backup' 2018-08-28T11:52:31.914-0400...

Tobacco wrote Have you tested whether this affects portal web service or not? Hello Tobacco, yes, I did test it, and no, it does not affect the portal page. The EAPs still address the portal using a...

krok wrote is possible to do that on WBS210 ? AFAIK, WBS210 does not support ebtables. I would recommend to use ACLs on the L2 switch the WBS and the router are connected to rather than configuring...

David_Moen wrote I figured out how to set PVIDs. One more question though, In this instance, what PVID should port 24 have? You can set it to the default VLAN1. The PVID on a trunk port specifies to...

macmakkara wrote I have it plugged in and POWER and LAN leds are on, nothing else. That's intentional. The WiFi network and the LEDs for the signal level will turn on if you connect to the CPE the...

freddb wrote hard stuff (hard to replace a 15m cable going through walls) but now all is ok. Great it works now. Please mark the thread as solved by choosing "best solution". For example, in post #8...