Depends on the topology. If your 3 switches are connected to the GW, then this would be the next hop. If the switches are connected directly, you could use routed ports for next hops (Sw A Gi1/0/2...

Ups, yes, my fault. Sorry. I had 172.16.0.0/15 in mind, but it's indeed 172.16.0.0/12, you're right. Do you have set static routes back to the VLAN(s) from which you want to access the switch?

I see, that's a CPE210 v2. This hardware is different from v1.x meaning there wasn't just a change of corporate identity (new logo) like it was for the different versions of CPE510. Unfortunately, I...

Just out of curiosity: if you connect a copper cable into one of the combo ports and remove the SFP, does the port become selectable in the cable test menu?

klukacs wrote I checked ACL section but no ACLs are in place. You would have to create ACLs to restrict web UI access to the switch. That's not really an elegant replacement for a mgmt VLAN, but it...

Compte-Samy wrote I'm totally new to vlan. I know it filters broadcast between vlan and with different vlan subnet all trafic goes to the router. That's why I made all vlan in the same subnet and I...