A CPE starts upgrading only if the firmware has been completely downloaded to it. So it should not do any harm if you PC freezes as long as you don't turn off power of the CPE.

The router needs to provide DHCP for all other devices if you don't use static IPs in your network. The switch cannot provide DHCP, at least not the TL-SG105E. If your network's IP range is different...

CPEs are designed for directional radio links. Their two antennas are directional, meaning their beam width is 65° (H) / 35° (E). To cover an area all around (360°) you would better use an outdoor...

patch wrote I think TP-Link Easy Smart switcher are a good HW which need a totally review of the Firmware (no bug fix only) performed by a Networker. At the moment they are unusuable. I agree that...

johnsnow wrote Since i have a single AP on port 4 with nothing else i should leave vlan1 as untagged and then tag vlan3 for port 4? What do you mean with "single AP with nothing else"? No Multi-SSID?...

RazRsf wrote -Why in hell it doesn't work on AP mode when I use the Ethernet cable if the status page shows that everything is fine? Do you have any idea? Yes. The SSID used in the CPE client is...