Again: you are not assigning IPs to a VLAN. You cannot assign IPs to a VLAN, that's impossible. You assign IPs to an interface into a VLAN. A switch's interface is not the VLAN, it's an interface,...

rodhzuniga wrote good idea the eap110, with an omnidirectional antenna, how much range will 360? Theoretical up to 200m, in practice 100m to 150m if you use 802.11n mode (also depends on client...

CPEs haben Richtantennen mit einem relativ schmalen Abstrahlwinkel von nur 65°, daher wirst Du mit Standard-Geräten nur in sehr engen Grenzen Empfang bekommen. Diese Grenzen lauten: 1) Entfernungen...

You're welcome. Yes, old HW version 1 of CPE is very versatile with two LAN ports. But never turn on PoE pass-through in the CPE's web UI on the LAN1 port by accident; it will apply power without any...

Difficult to give recommendations if you don't provide enough details such as the exact location (latitude, longitude), distance of both houses etc. For example, if the following matches your...

Make sure the CPEs are exactly aligned to each other while trying to connect them. Sometimes it needs several tries until the client finds the AP in a survey, but if the client is eventually locked...