Sure there is a rule. Go to " Insight" -> " Client Statistics", select " Blocked" from the tabs, click on " Unblock" for the user you want to unblock.

TPTHZ wrote In my opinion, you need not attenuator, I have connected two MC210 CS via 1meter fiber did the test, everything is ok. Second that, I too use short fiber cables for tests with single-mode...

To configure band steering on the EAP245 you need to run the EAP Controller. I'm not sure wether band-steering is turned on automatically with default settings in standalone-mode, but I'm sure that...

The CPE in building 1 should be configured as an AP, while the CPE in building 2 needs to be in client mode: The device(s) connected to the client need to be set to the subnet from your provider with...

Good question. Probably to reduce production costs for the CPE210 - the new HW version comes with a smaller PoE injector (0,6A instead of 1A).

I guess the problem is in your network setup. But to say for sure, much more information about your network topology and setup of the devices would be needed. The difference between Archer C50 and...