@jsde The question is what IP the remote network has, is it e.g. 192.168.0.0/24 and 192.168.1.0/24? You can route 192.168.0.0/23 in the wireguard tunnel which then covers both networks.

@jsde Yes, I agree that it should have been possible to have multiple networks in the allowed address, but if you are going to set up Wireguard site to site, you only need to add remote lan in the...

@daubstep This upgrade is not in the software pool on the controller so you must upgrade manually.

@daubstep set aside an hour for the job. it has to be done twice since you have to remove WAN again to enable LAN and the router is not that quick to boot

@KosmosCat

@KosmosCat Look loke you have typed wrong ip address 169 should be 168