@Fae I thought this would be fixed in 5.4.6 but there are still problems, the router is connected but does not communicate correctly with the controller, VPN status and Routing info are empty and...

@AaronN you cannot enable access to the router from the WAN, try and test from the WAN not from the LAN as you are doing now, if you try from the LAN with your WAN ip, you will get router login but...

@Tescophil I can confirm that hardwired device sometime roam from switch to switch and from switch to router. My main switch is TL-SG2428P v1.0 and this switch is connected directly to TL-SG2428P...

@Fae there are two ER605v2 but the stratrange thing is if I use SHA2 in one site and SHA1 in another site vpn still work. My settings

xmtr34 wrote I have set the gateway of the Far End EAP225 to 192.168.0.13, which is that of the near End and the Primary DNS server IP 192.168.9.1 @xmtr34 Im not sure I understand this but ther...

@xmtr34 this was a lot of stuff, can you make a network diagram of your components? I think it will be easier to understand then.