@Fae I register that you have an explanation for all the points I have mentioned, but it does not help much. points 1-6 are still bugs and should be reported to those who develop, and it should also...

@d0ugmac1 try dragging this to the right

@Uptonk there is no need to have on bridge if you do not need to have access to LAN via the internet, there is also no problem with DHCP on both routers, you connect WAN on is ER605 to the modem also...

@Uptonk No you can not have the same ip network on WAN and LAN, you say the modem is in bridge mode, then you should get a pubic ip not 192.168.5.0 network, have you tried to turn off bridge mode on...

@Uptonk Which LAN ip do you get from the modem when you connect to the PC? default LAN on ER605 is 192.168.0.0/24 if you have the same on the modem it will crash, you can not have the same IP network...

Anyone or @Fae @Hank21 I wonder where to define threshold on EAP Force-Disassociation option. The help text says this. Force-Disassociation: When disabled, the AP only issues an 802.11v roaming...