lhwidgetLV1Online
Following: 0Followers: 0
Forums/ Deco
2022-01-30 23:17:41
Changing the basic configuration of an M9 system
I never noticed this before. My Deco M9 is set up as a wireless router. I have a a copper network on 192.168.1.xxx and the M9 is on 192.168.68.xxx. I can't transfer files from my Windows network to...
0HELPFULS
Forums/ Routers
2019-07-09 04:24:02
Re:Re:Re:Simple 1 to 1 NAT set-up
Thank you for the help, very much appreciated. Do you know if any of the other routers offers the directed broadcast option?
0HELPFULS
Forums/ Routers
2019-07-08 18:25:02
Re:Re:Simple 1 to 1 NAT set-up
Mitya wrote Yeah, you can't ping on the other side of NAT. That is why you use one-to-one NAT. You should be able to fully control your 192.168.1.107 by using 10.10.10.2 instead. Thank you for...
0HELPFULS
Forums/ Routers
2019-07-08 18:24:00
Re:Re:Simple 1 to 1 NAT set-up
Andone wrote lhwidget wrote I'm a PLC programmer and I'm afraid I might be out of my depth here. PLCs generate too much traffic and need to be kept seperate from a comapny network. However I need...
0HELPFULS
Forums/ Routers
2019-07-05 20:46:05
Simple 1 to 1 NAT set-up
I'm a PLC programmer and I'm afraid I might be out of my depth here. PLCs generate too much traffic and need to be kept seperate from a comapny network. However I need access to the PLC from the...
0HELPFULS
Forums/ Routers
2019-06-28 13:07:11
Re:Re:WAN port IP Addreass
I thought so, thanks for confirming! Sincerely, Jay
0HELPFULS
12