Today it's happened again: It's 13:45. At 13:20 one camera stopped working. I log into omada and find the EAP211-Bridge(US) V2.0 slave device is offline. The EAP610-Outdoor connected to that slave...

Context: I'm on a farm with little to no cell phone coverage, so I've an increasingly extensive WiFi network. It currently consists of 27 omada devices, 21 of which are APs. I also have many IP...

@GRL Thanks, I was thinking the same. But it might be better to use the port preceding 29810, as Omada has been adding ports in sequence throughout the years. I originally forwarded 29810-29820 when...

Thanks @GRL and @Vincent-TP. You helped me figuring out the problem. So if it's working for others with the same config as me, then it's definitely a problem particular to me, and since it's not my...

I just caught the ephemeral Firmware Upgrade error message of device "Oficina San Carlos". For this test I changed the "Device Management" to the local OC300 IP Still no luck on both sites I'm trying...

@GRL GRL wrote @Tintronic controller hostname/ip should be the internal LAN side IP of the controller, for example in my case its set to 192.168.0.230 which is my OC300 lan side IP Your port forward...