@mikejp Hi, Back when the Gigaset N300 was setup for the old router, was it set to IP Address Type "Dynamic" or "Static"? In case it was set to "Static", then you might need to adjust the addresses...

@BWGreen Hi, TP-Link decided that the users shall only be able to edit the names of the devices via the "Clients" menu. (see screenshot below) The problem with this is that some router models only...

@tomotomo Hi, If the beta version was the same *.bin file for the EU version and the JP version, then it should be also the same for the release version of the firmware.

@AnonymousUser01 Hi, You need to go to the other "Wireless" menu by clicking the "Advanced" icon (to the right of the "HomeShield" icon). Under the "Wireless" icon TP-Link has omitted the Transmit...

@alex15 Hi, If http://tplinkwifi.net doesn't work for you, then try http://192.168.0.1 instead. In case that doesn't work either, then look up the "gateway address" on one of your client devices....

@GregZaaa If the adapter in the shed can't see the adapter in the boat storage, then it means it receives no sufficiently good signal from it to establish a link. Given the numbers you posted, the...