@MarkMallard If you use a xDSL service from your ISP then you need a modem connected before your AX10. AX10 is a wireless router, not a xDSL modem/router. If your modem allows to be set in bridge...

@colefamous For your device there's a firmware from 2021 - pick the top one from this list. You can go ahead and update via wireless.

@mjd-syd It could be a DNS issue. Try the following: Then test to see if that resolves the issue.

@APmodeUser When configuring C6 in AP mode set its IP address as Static IP (in the same subnet as the main router) with the DHCP server OFF. Try using another LAN port on the Experiabox V10 router to...

@Harsh_Patel Read this article - https://www.rogers.com/customer/support/article/how-to-bridge-your-rogers-ignite-modem To avoid double NAT in your network (according to your needs) you may put your...

@Moritz_ While router firewall works only for incoming connections you can try using Parental control or Access control (check the router's user guide for details) for`restricting Internet access or...