@SunnPhoenix You have to check in OpenWRT community for your particular model but that will void the router warranty. A router like ER605 can do that out of the box. In this scenario you could use...

@Mad_Max-53 Actually when configured in AP mode AX1500 LAN ports work as a network switch - here's how (Case 1) to configure AX1500 in AP mode.

@MPH-RJ Here's an aexample of C80 in AP mode: where 192.168.0.1 is tthe LAN IP address of your main router. C80 DHCP server should be disabled. Make sure you're using C80 WAN (blue) port to connect...

@WifiUser20 When updating to FW v1.3.2 bare in mind this thread and how to mitigate this issue.

@Red1030 Update your router FW to the latest FW release from here. To change your ISP default PPPoE session DNS set these: Make sure that there's no optional settings here: Then test if your clients'...

@TPUserNorm That depends on which hardware version is your C6. If its HW version is v4 you can use this guide for configuring Easymesh. If C6 is bellow HW v4 you should use it as your main router and...