@TheHypnooToad Passive cooling only, check the internal photographs here: https://fccid.io/2AXJ4BE550/Internal-Photos/EUTPhoto-Internal-Archer-BE550-6618212 Only CPU and memory utilization can be...

@abaddon Your observation is correct. There are some router models that have their MU-MIMO setting enabled by default and this setting is not shown in their WebGUI. Maybe this is the case here (for...

@abaddon It seems that these features are not implemented in the AX21 v4.6. They are not mentioned / included in its user guide nor its emulator. It doesn't support 160Mhz channel width on its 5GHz...

@Noli1 Me neither. I don't think that these are related. It sounds to me more like a DNS issue. Do the following and then test again: Set fro primary DNS your router - 192.168.2.1. Set fro backup DNS...

@Noli1 " Or do I just set the RE300X to static IP: 192.168.2.254 & still DHCP Off? " Yes, that's exactly what you should do and then test how it goes.

@Mon_Mon When using Archer C6 WDS feature I am not sure that the Archer can be seen in the Vodafone router connected devices. But if you connect Archer C6 in AP mode (wired) to the Vodafone router it...