@David_in_Boston Don't worry about the tplinkap.net resolving. When you're connected directly to the AP it will resolve to the local IP address of the AP. Same mechanism is used for some additional...

@montaserj Try resetting the RE200 to its factory defaults - press the reset button for about 10 seconds. If the issue persists contact your local tech support for further assistance.

@monty74 Here's how to change your 5Ghz band wireless channel (try channel 36 as advised): <https>://community.talktalk.co.uk/t5/Articles/Change-your-wireless-channel/ta-p/2204684

@Alexander1991 That's just what I've meant - the reason for inability to implement such feature is usually the HW - chipset of the router (in rarer cases the feature has been deprecated).

@Alexander1991 My statement was an educated guess based on my experience. On the other hand you can clearly see from the list I posted that AX20 v3 and above supports Easymesh.

@LuizMP Here's a guide on how to configure remote access for the router web management interface. For this to work you have to be with a public IP address on your EX220 WAN (internet) port. That...