@ugandave Well, if AX53 works as expected with the cable from its kit, but doesn't work with the outbuilding cable that means for some reason AX53 doesn't like outbuilding cable. What you could do is...

@BarryThompson This feature is implemented on a particular router models described in this thread.

@Moe29 From your description, you're not missing anything - here's the guide to configure WDS on C60. Try rebooting the C60 after configuring the WDS and check if there's any difference. Keep in mind...

@Rob__ When used in client mode TL-WR902AC should have a LAN IP address in the same subnet as your main router already has - that's by design. If you need to put your Pi cluster in a different subnet...

@ugandave Configuring AX53 in AP mode is very simple. Use this guode - Case 1. Use kit's AX53 ethernet cable for initial configuration and tests. If everything works as expected inside the building,...

@VISHALRAJ Use this guide to update your router FW. Make sure that FW region and HW version match.