@Antonio465 Refer to this thread and change the setting of the router's Internet port. If you can't find teh setting in question in "Advanced > System Tool > System Parameters" try here: If the issue...

@malada Well, either expand your DHCP pool to 192.168.1.1 - 192.168.1.253, reboot the router, then test or if you don't want to expand the DHCP pool, use a static IP addresses for these cameras...

@malada Some routers allow the address reservation feature to be functional only if the reserved IP addresses are within the DHCP Server pool range. Can you confirm this to exclude this hypothesis....

@Tefa2022 After you have HTTPS enabled, try the following: If the router IP address is 192.168.0.1 type in the address bar - https://192.168.0.1 Clear the browser cash and reboot the router, then...

@Macrox It's quite possible that the early EasyMesh FW allows the hidden networks in AP mode, even EasyMesh feature has been disabled in "Router mode". Thanks for reporting this behavior.

@realmac Use a computer to connect to the router with an ethernet cable, connected to one of the router's LAN ports. Use this guide to determine router's IP address and open it in a web browser - you...