@Pinifarina2 Band 4 is not available in TP-Link devices with EU FW region due to the EU regulations. For 5GHz channel try setting wireless channel to 36 and channel width to 160Mhz. If this doesn't...

@Pinifarina2 Read through this story about the 5GHz experience with DFS channels. At its the end you may find the answer of your second question, regarding Band 4. As for your first question I would...

@jupz05 Use this guide for configuring RE450 via WebGUI. There's a video for its installation as well. Make sure you're with the latest FW release on your RE450 depending on ts HW version. How to...

@locrianmod If you're referring to OneMesh feature, RE205 v3 can be used to build a OneMesh network but you have to use your main router to build it (it should be OneMesh capable of course) - check...

@wubeone You may go through his FAQ as well - such behavior could be caused by wireless radar systems around you when using DFS channels. You may read this story too to see how to optimize the...

@visitnag For configuring Parental Controls on Archer C50 use this guide. If you have any difficulties configuring that I would suggest to go through this thread for more details.