Hello, I have a VIGI C540S that managed to get some water into the Ethernet plug and caused the plug and the cable to rust pins away, as with the POE it acted like an anode. I want to replace the cabl

Using SX3008F with the beta 1.20.14 firmware (because I had lockup issues with the latest release firmware). SSH is enabled in the default configuration (no SSH-related statements in “show running-con

Hi everybody! Got a strange DHCP logs from user's routers C6 or C64: 2001 2026-01-14 08:23:27 DHCP Server NOTICE DHCP Server allocated IP address 172.18.1.55 for the [client:a8:29:48:8b:2f:5e]. 2002 2

Hi, My ISP recently enabled IPv6 and I was able to successfully pass-through the IPv6 designation to all LAN devices. Following is my setup: ISP router -> after-market router -> L3 Managed Switch -> m

Hi, Is it possible to connect two ER7212PC's via the WAN ports, each with a different subnet via DHCP, and still be able to access devices on both networks? So: Router 1: static Internet IP / WAN: 192

I've noticed that the system time on my ER706W managed by an Omada software controller is consistently behind time. I have enabled the NTP server in my site But gateway configuration shows this device