Dr_MartyLV1Online
Following: 0Followers: 0
Forums/ Switches
By AStuk a week ago

SG3210X-M2 died

After working flawlessly almost a year SG3210X-M2 switch went offline. Power and 2.5G ports status green, but no activity. Sys led not flashing. Reboot or reset does not help. Bought from Provantage s
Forums/ Requests & Suggestions
By Saraiks 2 weeks ago

LAG support for ER7212PC v1.0

PLEase enable LAG support for the ER7212PC so WAN integration can allow for higher bandwidth switch connections.
Forums/ Switches
By JumpingPeach 3 weeks ago

Trouble setting up SG3210X-M2 switch

I'm having trouble setting up my switch and getting it to connect to my software controller. My network is at 10.6.1.0/24 but the switch turns on with the IP 192.168.0.1 I was very surprised because t
Forums/ Switches
By TW_EPC 2025-07-18 07:47:09

Questions about VLAN configuration (trunk ports, batch config)

Hello everyone, We want to renew our infrastructure soon and have bought 6x SG3452XMPP. Plus an OC300, because the WLAN system will also be integrated there soon. Unfortunately, several questions and
Forums/ Gateways
By SiliconLunch 2025-07-24 07:17:18

Load Balancing / Online Detection not working

I have configured my ER707-M2 with 2 WAN ports which each are connected to the router/modem of my 2 ISPs. Let's call WAN1 ISP "COSMOTE" (a 50 Mbps service) and WAN2 ISP "Starlink" (a 400 Mbps service)
Forums/ Wireless
By Dr_Marty 2025-07-23 23:13:09

EAP670 Spontaneously Goes into Adopting until being reset

EAP670 spontaneously goes into adoption mode every few days. It was working fine for 6 months or so but then started having problems. There is nothing in the logs. See attached photos. How can I troub
12