Forums/
Switches
2025-01-13 14:50:13
Configuring Network for both NDI and DANTE
Hello, i recently bought some network devices for a club: ER605, EAP255, TL-SG2008P. Router connected to switch, then from switch i connected: 2 PoE APs, 1 ArtNet Node, 1 Macbook for sending DMX and N
Forums/
Switches
2024-07-23 03:07:07
How to Set Up QoS for Dante and Voice Protocols on Omada Switch
Background: This post provides a configuration guide to set up QoS on Omada Switch for Dante and voice-related protocols. This Article Applies to: Omada switches with the QoS feature. L2+ and L3 Switc
Forums/
Requests & Suggestions
2025-04-14 10:39:54
Limit DHCP adresses
Hey there, I would like to set up a DHCP server for a VLAN interface with ip address 192.168.200.1 and limit the DHCP addresses it serves from 192.168.200.100 to 192.168.200.254. Somehow I cant config
Forums/
Switches
2025-04-08 11:16:02
SG3428(UN) Ver:2.30 accidentally upgraded to wrong model firmware
Hey there, I'm a little confused.... On the back of my switch(es) it says model # SG3428(UN) Ver:2.30 In Omada controller I had a firmware upgrade available and now my switches are called TL-SG3428 v2