Fausto879LV1Online
Following: 0Followers: 0
Forums/ Routers
By Fausto879 2023-11-30 11:12:01

Create rules equal to existing ones, the router recognizes them as a default rule Possible bug?

Something strange happened. In Service Type List, I added DNS ports to block and ensure that everything goes through DNS Proxy Doh I didn't realize that this Service Type already existed and I created
Forums/ Routers
By Fausto879 2023-04-16 15:27:05

IPV6 Possible bug?

I restart the ER605 in both situations and the Internet does not work. Note, when I put it in IPV6 and in advanced options put DHCPV6 takes the ipv6, but when I do the ipv6 test it fails. In no situat
Forums/ Safestream Routers
By dfalessi 2023-01-04 08:28:32

http://192.168.0.1/ used by my modem and tl-r470t+

Hi, I am connecting my tl-r470t+ to two modems. One modem uses 192.168.0.1 as a base IP to connect and configure as my tl-r470t+. The main problem is that tl-r470t+ cannot connect to the modem (likely
Forums/ Routers
By Fausto879 2023-04-10 18:12:16

Static Route

I have two internets. ppoe ok, another router offered by the internet operator. I'll call it R1 and R2. R1 connects via ppoe on port 1 of the er605. Internets ok.load balance ok.The r2 connects via dy
Forums/ Routers
By johnmontfx 2023-04-10 17:00:02

Policy-based routing for destination (internet) IP

I'm attempting to do policy based routing, directing all LAN traffic to/from a website over a specific WAN (WAN/LAN1) port. Basically one WAN has a higher upload rate so I want to use that interface.
Forums/ Deco
By m9defective 2022-07-22 19:08:08

Deco M9+ speeds drop when ethernet switch is connected

Hi, I recently purchased a 3 pack deco m9+ set. Both my hardwired and wireless speeds would drop from 500+ mbps to 10-20mbps when I connected a TP-link 8 port ethernet switch to the "main router" deco
12